First, the uncle put a thin carbon fiber tube horizontally, and then started the hydraulic press. Maybe we didn't expect the carbon fiber tube to be completely flattened with a crisp cracking sound. Probably we felt that the horizontal position was unfair to carbon fiber. Uncle put a carbon fiber tube on the hydraulic press. I didn’t expect it to be worse. The hydraulic press directly pressed the carbon fiber tube from top to bottom and then carbon fiber. The tube is pressed back to the carbon fiber powder, and it seems that the posture is not a problem.
So the uncle used a thicker carbon fiber tube testing, but in the end it was still pressed into a pile of toner, but this time the carbon fiber was squeezed from the bottom up, but the uncle could only enlarge the stroke, directly A solid multi-layer carbon fiber, a final battle with the hydraulic machine.
The carbon fiber really lived up to expectations, not only unscathed, but also survived the first round of hydraulic machine attack, even after replacing the hydraulic column of the small one, it was still unmoved. Finally, in order to break the deadlock, the uncle put a nut on the carbon fiber block. After two sounds, the hydraulic press directly pressed the nut into the carbon fiber block, which was a win over the carbon fiber. I did not expect carbon fiber twice as hard as stainless steel. In front of the hydraulic machine is not an opponent at all, it seems that you can take a hydraulic machine to defend yourself.
Goodsjack specilaizing in hydraulic press designing and manufacturing 20 years. We have desiged and manufactured hydraulic press machine for carbon fiber computer panel.
Remarks: Besides standard hydraulic press machine manufacturer, non-standard hydraulic press solution are accepted either. Once send us your carbon fiber drawing. Then best offer will be provided for you!
