• Servo Hydraulic Press Machine

Use Range

Servo Guide Rail Hydraulic Press Machine Solution Use range: The hydraulic press was mainly applied in to metal materials, cold forging, warm forging and extrusion molding, and punching mark, light stretching, cut edges and other materials. Such as cars, motorcycles, bicycles, cell phone case, LED radiator and heat sink, watchcase, hardware tools. Brand Name : GOODSJACK, DELISHI;

Product Details

guide rail hydraulic press machine

 

Energy saving: hydraulic and electric control adopts servo electro-hydraulic composite servo system, saving 60%-75% of electricity.
High precision: to ensure that the machine's repeated positioning accuracy can reach ±0.03mm, and the pressure error is ±1%.
Low failure rate: the servo control system does not do useless work, has a lower oil temperature than the traditional system, and there is no negative pressure in the oil circuit system, extending the service life of seals and hydraulic components.
Whole frame structure: the slider is guided by high-precision guide rails. It has strong anti-side force and stable operation. It is suitable for forming precision and asymmetric products.

 

1. This guide rail hydraulic press machine was mainly applicable to metal materials of cold extrusion, forming, shallow, drawing and blanking purposes such as: automobile gears, car universal joints, motorcycle spare parts, cell phone casing, LED radiator, aluminum heat sink, watchband, watchcase and hardware tools etc.
2. Stamping, forming, shallow, drawing and pressing assembly etc. Especially suitable for the precision molding parts.

cold forging press application

 

 
Model Units Specifications
DKHS-100 DKHS-200 DKHS-300 DKHS-400 DKHS-500 DKHS-650 DKHS-800 DKHS-1000 DKHS-1200 DKHS-1500
master
cylinder
rated
capacity
ton 100 200 300 400 500 650 800 1000 1200 1500
stroke mm 300 400 400 400 500 500 500 500 500 400
fast dowm
speed
mm/s 180 160 160 230 230 170 190 210 190 220
coining
speed
mm/s 7-15 8-17 5-12 7-18 8-16 5-12 5-12 8-16 6-15 3-13
return
speed
mm/s 170 150 130 210 200 170 180 210 160 210
system pressure bar 240 235 240 240 250 248 240 240 250 240
knock-out cyinder ejecting
force
ton 15 30 30 40 40 50 50 60 80 100
stroke mm 200 200 200 200 250 250 250 250 250 200
mandrel
diameter
mm 40 50 50 60 60 80 80 80 80 100
open heigh(slide to
bolster)
mm 600 700 700 700 800 900 1000 1100 1200 1050
working
table size
L-R mm 500 700 700 800 800 1000 1000 1200 1300 1400
F-B mm 500 700 700 800 800 1000 1100 1200 1300 1400
main motor power KW 8.6 16 23.6 34.6 34.6 37 60 74 90 110
over all
dimension
L-R mm 1250 1680 1680 2600 2650 2940 3000 3660 3800 4150
F-B mm 1430 1780 1780 2100 2100 2100 2300 2450 2500 2680
H mm 2850 3480 3500 3700 4050 4100 4320 4560 4720 4820
Remarks: Final specifications are subject to contact or agreement.