How To Effectively Clean Hydraulic Press Machine
2022-01-05 13:54:37
The hydraulic press machine will not only be contaminated during the experiment, use and storage, but also during the manufacturing process. Hydraulic press machine will affect the normal operation if it is not cleaned for a long time, so the hydraulic press machine must be cleaned at ordinary times. The following is the method steps for cleaning hydraulic press machine.
1. When cleaning the general hydraulic press machine, use hydraulic oil or test oil for work. However, kerosene, gasoline, alcohol, steam or other liquids cannot be used to prevent corrosion of hydraulic components, pipelines, fuel tanks and seals.
2. During the cleaning process, the operation of the hydraulic pump and the heating of the cleaning medium are carried out at the same time. When the temperature of the cleaning oil is 50-80℃, the rubber residue in the hydraulic press can be easily removed
5. A filter or screen should be installed on the oil return line of the cleaning oil line. At the beginning of cleaning, because there are more impurities, you can use an 80-mesh filter; later, use a 150-mesh filter.
6. The cleaning time is generally 48-60h, which depends on factors such as the complexity of the system, the filtration accuracy requirements and the degree of pollution.
7. In order to prevent corrosion caused by external humidity, the hydraulic pump should continue to run until the temperature returns to normal after cleaning.
8. After the hydraulic press machine is cleaned, the cleaning oil in the circuit should be drained.
1. When cleaning the general hydraulic press machine, use hydraulic oil or test oil for work. However, kerosene, gasoline, alcohol, steam or other liquids cannot be used to prevent corrosion of hydraulic components, pipelines, fuel tanks and seals.
2. During the cleaning process, the operation of the hydraulic pump and the heating of the cleaning medium are carried out at the same time. When the temperature of the cleaning oil is 50-80℃, the rubber residue in the hydraulic press can be easily removed
3. During the cleaning process, a non-metallic hammer can be used to hit the oil pipe, which can be hit continuously to facilitate the removal of attachments in the pipeline.
5. A filter or screen should be installed on the oil return line of the cleaning oil line. At the beginning of cleaning, because there are more impurities, you can use an 80-mesh filter; later, use a 150-mesh filter.
6. The cleaning time is generally 48-60h, which depends on factors such as the complexity of the system, the filtration accuracy requirements and the degree of pollution.
7. In order to prevent corrosion caused by external humidity, the hydraulic pump should continue to run until the temperature returns to normal after cleaning.
8. After the hydraulic press machine is cleaned, the cleaning oil in the circuit should be drained.
TOP
WINDOWS