Hydraulic press machine is a general-purpose press with a sophisticated structure, which has the characteristics of wide range of uses and high production efficiency. Delishi/Goodsjack hydraulic press machine can be widely used in cutting, punching, blanking, bending, riveting and forming processes. By applying strong pressure to the metal blank, the metal is plastically deformed and fractured to be processed into parts. When the mechanical hydraulic press is working, the motor drives the large pulley through the V-belt, and drives the crank-slider mechanism through the gear pair and the clutch, so that the slider and the punch go straight down. After the mechanical press is completed, the sliding block travels upward, the clutch is automatically disengaged, and the automatic on the crankshaft is switched on, so that the sliding block stops near the top dead center.
Before the formal operation, an idling test run is required to confirm that all parts are normal before work. All unnecessary items on the workbench should be cleaned up before starting the machine to prevent the sudden start of the slider caused by driving vibration and hitting people or hitting the switch. Tools must be used for operation. It is strictly forbidden to directly reach into the mold mouth to take objects by hand, and hand tools must not be placed on the mold.
When adjusting the position of the workpiece in the die area or removing the workpiece stuck in the mold, the foot must leave the pedal. Multiple people operating the same press should have a unified command and a clear signal, wait for the other party to make a clear response, and confirm to leave the danger zone before moving. Sudden power failure or operation should turn off the power, and restore the manipulator to clutch neutral, the brake is in the braking state. The overhaul and adjustment of the hydraulic press machine and the installation, adjustment and disassembly of the mold should be carried out when the hydraulic press machine tool is disconnected from the energy source (such as electricity, gas, liquid) and the machine tool is stopped, and a cushion block is placed under the slider to be reliable Support. The hydraulic press machine start switch is listed and an alarm is displayed.
