How to Improve Work Efficiency Of Hydraulic Press MachineUpdate：2021-10-06 Hits：140
As China leading hydraulic press machine solution, we all hope that we can improve our work efficiency of hydraulic press machine. As an employee, this will not only reduce our workload, but also be appreciated by our leaders, which is simply killing two birds with one stone. But wanting to improve work efficiency is not so simple. Remember the following!
2. Before starting the equipment, check whether all the motion mechanisms and solenoid valves are in the original state, and check the oil level in the fuel tank. If an abnormality or insufficient oil is found, it is forbidden to start the hydraulic pump motor and seek maintenance by maintenance personnel.
3. The operator should always check the working condition of the hydraulic system, observe the working pressure and speed, check the size of the workpiece and the wear of the props, to ensure the stable and reliable operation of the hydraulic system.
4. In winter, when the oil temperature of the fuel tank does not reach 25°C, the actuators cannot start to work in sequence, but can only start the hydraulic pump motor to make the hydraulic pump run dry. During summer work, when the oil temperature in the fuel tank is higher than 60℃, pay attention to observe the working condition of the hydraulic system and notify the maintenance personnel to deal with it.
5. The operator cannot damage the interlocking device of the electrical system, cannot push the electric control valve by hand, cannot damage or move the position of each operating gear arbitrarily.
6. For hydraulic equipment that has been shut down for more than 4 hours, before starting to work, the hydraulic pump motor should be started for 5-10 minutes before it can work under pressure.
7. When the hydraulic system breaks down, the operator should not move without permission and should immediately report to the maintenance department.
8. The hydraulic press machine should always be kept clean to prevent dust, cutting fluid, cutting, cotton yarn and other debris from entering the oil tank.
If you need hydraulic press machine,want to improve your work efficiency of hydraulic press machine,welcome to contact GoodsJack.
